Canon Pixma MP530 - Manual (Page 32)

30 Chapter 1 Before Printing
2
Pinch the Paper Guide and slide it against the left side of the envelope.
3
Press [Feed Switch] so that the Auto Sheet Feeder Lamp lights.
4
Select [Envelope] in [Media Type], and then select [DL Env.] or [Comm. Env. #10] in
[Page Size].
For information on the printer driver settings, refer to the Printer Driver Guide.
z Loading Other Small-Sized Paper in the Auto Sheet Feeder
1
Load the paper into the Auto Sheet Feeder with the print side face up and align the
Cover Guide on the right side of the Paper Support.
2
Pinch the Paper Guide and slide it against the left side of the paper stack.
Note
A maximum of 10 envelopes can be loaded at once.
Note
z Fold the envelope flap shut (A).
z Printing direction (B).
Important
Cutting plain paper to 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39"
/ 54.0 x 86.0 mm (Credit Card) size for a trial printing can cause paper jams.
Important
Ensure that the Cover Guide stands when you load paper in the Auto Sheet Feeder.
Note
z Load the paper lengthways regardless of the direction of the document.
z You can load up to 20 sheets of 4" x 6", or Credit Card-sized paper, and 10 sheets of 5" x
7"-sized paper.
2
1
3
(B)
(A)