Canon Pixma MP530 User Manual
Page 56
54
Chapter 3
Printing Photographs Directly from a Compliant Device
1
Set up the machine.
Refer to the Easy Setup Instructions to set up the machine and make it ready for printing.
2
Turn on the machine.
See
“Turning on the Machine” on page 18
3
Load the paper in the machine.
See
.
4
Connect the PictBridge compliant device to the machine.
(1) Ensure that the device is turned off.
(2) Connect the device to the machine using the USB cable (for connection to a computer)
supplied with the device.
Important
Do not connect PictBridge compliant devices or Canon Bubble Jet Direct compatible digital cameras
to the machine while copying, scanning, faxing or printing is in progress.
Note
When printing photos with the digital device connected to the machine, it is advisable to use the AC
adapter supplied with the device. If you use the device battery, be sure to charge it fully.
Note
The Print Head cannot be aligned using the controls of the digital device. If the Print Head
alignment is not yet performed, execute automatic Print Head alignment, see
Print Head Automatically” on page 106
.
Note
Depending on the model or brand of your device, you may have to select a print mode
compliant with PictBridge before connecting the device.
You may also have to turn on the device or select Play mode manually after connecting the
device to the machine.
Perform necessary operations according to the instruction manual supplied with the
PictBridge compliant device.
Note
Some types of the PictBridge compliant devices turn on automatically, when connected to the
machine. If the device not turns on automatically, turn it on manually.