Canon Pixma MP530 - Manual (Page 79)

Chapter 4 77 Faxing
2
Use [ ] or [ ] to select .
3
Press [OK] two times.
The MEMORY LIST is printed.
z Printing or Deleting a Document in Memory
1
Press [FAX], then press [Menu].
2
Use [ ] or [ ] to select .
3
Press [OK].
4
Use [ ] or [ ] to select or .
z If you select :
(1) Press [OK].
(2) Use [ ] or [ ] to select the transaction number (TX/RX NO.) of the document you
want to print, or enter the number using the numeric buttons.
If you are unsure of the transaction number, print the MEMORY LIST (See
“Printing
the MEMORY LIST” on page 76 ).
(3) Press [OK].
(4) Use [ ] to select to print the first page only, or use [ ] to select to
print all pages of the document.
(5) Press [OK].
(6) To print another document, return to branch-step 2, or to finish printing, go to step 5.
z If you select :
(1) Press [OK].
(2) Use [ ] or [ ] to select the transaction number (TX/RX NO.) of the document you
want to delete, or enter the number using the numeric buttons.
(3) Press [OK].
(4) Use [ ] to select to delete document, or use [ ] to select not to
delete the document.
(5) Press [OK].
(6) To delete another document, return to branch-step 2, or to finish deleting, go to step
5.
5
Press [Stop/Reset].
z Checking a Document’s Details in Memory
If the machine was not able to print a received fax, as when paper or ink has run out or a paper
jam has occurred, the fax is automatically stored in memory. When selecting a document in
memory to be printed or deleted, you can check its details on the LCD as follows:
Note
z If there are no documents stored in memory, the machine will switch to the standby mode
after is displayed.
z In step 2, you can also print this list from in of
the FAX SETTINGS menu (See
“PRNT REPORT/LIST” on page 93 ).