Canon Pixma MP530 User Manual
Page 64
62
Chapter 4
Faxing
Setting the Telephone Line Type
Before using your machine, make sure you set the correct telephone line type for your telephone
line. If you are unsure of your telephone line type, contact your telephone company. For ISDN
(Integrated Services Digital Network) or ADSL (Asymmetric Digital Subscriber Line)
connections, contact the telephone company or service provider to confirm your line type.
1
Press [FAX], then press [Menu].
2
Use [
] or [
] to select
3
Use [
] or [
] to select
4
Use [
] or [
] to select the telephone line type, then press [OK].
5
Press [Stop/Reset].
Registering Sender Information
You can register sender information (Transmit Terminal Identification (TTI)) in your machine so
that your name or company name, your fax/telephone number, and the date and time of
transmission are printed in small type at the top of each page to be received. Thus, whenever
you send a fax from this machine, the recipient receiving the fax knows who sent it, and when it
was sent.
Below is an example of how your sender information would be printed on a fax sent from your
machine:
Note
You can print the USER’S DATA LIST to check the current setting (See
“Printing the USER’S
DATA LIST” on page 71
).
TOUCH TONE:
Suitable for tone dialing.
ROTARY PULSE: Suitable for pulse dialing.
Note
In New Zealand, select
USER SETTINGS
DATE/TIME SETTING
X
TEL LINE TYPE
W
TOUCH TONE
(A)
(B)
(C)
(D)
(E)