Canon Pixma MP530 User Manual
Page 84
82
Chapter 4
Faxing
call, the length of time the machine rings when it is a voice call, and the action the machine
must take if no one answers a voice call.
z
If You Have Subscribed to a Distinctive Ring Pattern Detection (DRPD)
Service with Your Telephone Company (US and Canada only):
z
Select
Setting the Ring Pattern
Your telephone company will assign a distinctive ring pattern to each number when you
order the DRPD service. Set the fax ring pattern that matches the pattern assigned by the
telephone company.
z
If You Want Your Machine to Automatically Switch between Fax and
Voice Calls by the Call Ring Patterns (Network Switch) (This setting is
not available in some countries and regions.):
z
Select
The machine identifies whether a call is fax or not by ringing tone and receives it.
Setting the Receive Mode
1
Press [FAX], then press [Menu].
2
Press [OK].
3
Use [
] or [
] to select the receive mode.
Note
For details on the FAX/TEL AUTO SW settings, see
z
When you receive a fax call:
The machine will ring according to the ring pattern you
have chosen and receive the fax automatically.
z
When you receive a voice call: The telephone will ring according to the ring pattern you
have chosen. Pick up the handset of your answering
machine to answer the call.
z
When you receive a fax call:
The machine will ring and receive the fax automatically.
z
When you receive a voice call: The telephone will ring. Pick up the handset to answer
the call.
Note
z
The name of this service varies depending upon a country. The typical example is as
follows:
Australia: NET SWITCH
New Zealand: FAX ABILITY
Finland: Own Ringing
z
To use this feature, you need to subscribe to a compatible service provided by your
telephone company. Contact your telephone company for details.
RECEIVE MODE SET
W
FAX ONLY MODE
X