Canon Pixma MP530 - Manual (Page 81)

Chapter 4 79 Faxing
„ Paper Size and Type
Load A4- or letter-size plain paper in the Auto Sheet Feeder or Cassette when you print the fax.
Step1
Load paper in the Auto Sheet Feeder (See “Loading the Print Media in the Auto Sheet Feeder” on
page 27 ).
Load paper in the Cassette (See “Loading the Print Media in the Cassette” on page 31 ).
z The paper size should be A4, LTR or LGL.
z Load legal-size paper in the Auto Sheet Feeder.
Step2
Select the receive mode (See “Receive Modes” on page 80 ).
z If you want to receive only faxes automatically with your machine, or you have a
dedicated telephone line for fax use only:
z If you receive mainly voice calls and sometimes faxes, or you want to receive faxes
manually:
z If you want to receive voice messages on your answering machine and receive faxes
automatically:
z If you want to receive faxes automatically as well as voice calls:
z If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service with your
telephone company (US and Canada only):
z If you want your machine to automatically switch between fax and voice calls by the call
ring patterns (Network Switch) (This setting is not available in some countries and
regions.):
Note
z You have to connect a telephone to the External Device Jack when you set MODE>, , , or .
z You have to connect an answering machine to the External Device Jack when you set
.
Important
z Load legal-size paper in the Auto Sheet Feeder.
z If the paper size is set to a setting other than or <8.5 x 11>, the received faxes will not
be printed, and the LCD will display and MEMORY>. Change the paper size setting to or <8.5 x 11>, and then press [OK].
z If a size of paper other than A4, 8.5 x 11 or 8.5 x 14 is loaded in the paper source specified
under [Feed Switch], only one sheet of the loaded paper is printed and SIZE> is displayed. Replace the paper loaded in the specified paper source with A4, 8.5 x
11 or 8.5 x 14 then press [OK].
z The auto feed function can be applied when the paper size for both paper sources is set to
or <8.5 x 11>. See
“About the Auto Sheet Feeder and Cassette” on page 24 .
Note
If the sender sent documents larger than letter-size (8.5" x 11"), such as 11" x 17" or legal-size
(8.5" x 14"), the sender’s machine may send the fax, automatically shrinking or dividing it, or
send only a part of the original.