Receiving faxes – Canon Pixma MP530 User Manual
Page 80
78
Chapter 4
Faxing
(A) Transaction number (TX/RX NO.)
z
A transaction number between 0001 and 4999 is a document being sent.
z
A transaction number between 5001 and 9999 is a document being received.
(B) Marks before the transaction number
z
No mark indicates a black & white document.
z
<
> indicates a color document.
z
<#> indicates a black & white document being sent or printed.
z
<&> indicates a color document being sent or printed.
Displaying Details of the Transaction
Use [
] or [#] to display the details (e.g. transaction number, transaction time and fax number).
Special Dialing
z
Dialing through a Switchboard
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is
connected through a PBX or other telephone switching system, you have to dial the outside line
access number first, and then the number of the party you are calling.
z
Sending/Receiving Using ECM
This machine is set to send/receive faxes in ECM (Error Correction Mode). Checking the
sending and receiving condition at the sending end and the receiving end respectively, ECM
automatically corrects errors caused by telephone line trouble.
Receiving Faxes
Flow of Receiving Faxes
The operation flow of receiving faxes is as follows:
Note
If you are unsure of the transaction number, print the MEMORY LIST (See
Note
z
If the sender's or receiver’s fax is not ECM-compatible, the fax will be sent/received in the
standard mode.
z
You can also disable ECM sending/receiving (See
PRINT DOCUMENT
TX/RX NO.
5001
(B)
(A)