Canon Pixma MP530 - Manual (Page 52)

50 Chapter 2 Copying
Procedure:
1
Display the Special copy screen.
See “Special Copy” on page 45 .
2
Load the document on the Platen Glass or in the ADF.
3
Use [ ] or [ ] to select , then press [OK].
4
Use [ ] or [ ] to select or .
If you selected and pressed [OK], go to step 8.
If you selected and pressed [OK], go to step 5.
5
Use [ ] or [ ] to set the vertical repeats (1 to 4).
6
Press [OK].
7
Use [ ] or [ ] to set the horizontal repeats (1 to 4).
8
Press [OK].
9
Specify the page size and media type.
See “Changing the Page Size and Media Type” on page 37 .
10
Specify the necessary items.
See “Changing the Copy Settings” on page 41 .
Note
When is selected, the document loaded in the ADF cannot be scanned.
Note
cannot be selected for the page size.
Note
cannot be selected as the copy ratio.
VERTICAL < 2 >
HORIZONTAL 2
VERTICAL 2
HORIZONTAL < 2 >