Canon Pixma MP530 - Manual (Page 42)

Chapter 2
40 Chapter 2 Copying
Copying
Making Copies
This section describes the basic procedure to make copies.
1
Prepare for copying.
(1) Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 18 .
(2) Press [COPY].
(3) Load paper.
See “Loading Paper” on page 22 .
(4) Ensure that the proper paper source is selected.
See “Changing the Paper Source” on page 26 .
(5) Load the document on the Platen Glass or in the ADF.
2
Start copying.
(1) Check the page size and media type.
(A) Ratio of Reduction/Enlargement
(B) Page Size
(C) Print Quality
(D) Number of Copies
(E) Media Type
(F) Intensity
(2) Use [ ] or [ ] to specify the number of copies.
Note
Press [Feed Switch] so that the Auto Sheet Feeder Lamp lights when loading paper in the
Auto Sheet Feeder and the Cassette Lamp lights when loading paper in the Cassette.
Note
For information on the types and conditions of documents which you can copy, see “Loading
Documents” on page 19 .
Note
Press [Paper] to change the page size, or media type. See “Changing the Page Size and
Media Type” on page 37 .
100% A4 STD 0 1
PLAIN
(A)
(F)
(C) (D) (B)
(E)