Canon Pixma MP530 - Manual (Page 114)

112 Chapter 9 Troubleshooting
z “ScanGear MP Won't Start” on page 141
z “Computer Stops Operating During Scanning” on page 143
z “Scan Quality is Poor (Poor Image Displayed on the Monitor)” on page 143
z “Parts of Image Missing or Surrounded by Extra White Areas” on page 144
z “Trouble Scanning with Multi-Scan or Multi-Crop Function” on page 144
z “Slow Scanning Speed” on page 144
z “"There is not enough memory." Message is Displayed” on page 144
z “Scanned Image not Displayed Properly” on page 145
z “Trouble scanning with MP Navigator” on page 145
z “Image position and size incorrect when scanning from the machine's operation panel” on
page 145
z “Scanned image is slanted although document is set properly” on page 145
z “Scanned image is rotated although document is set properly” on page 145
z “An Error Message Appears on the Screen” on page 146
z “Service Error 5100 is Displayed” on page 146
z “Writing Error/Output Error/Communication Error” on page 146
z “When an Error is Displayed Regarding Automatic Duplex Printing” on page 147
z “Error No.: 300 is Displayed” on page 147
z “Error No.: 1700 is Displayed” on page 148
z “Error No.: 1851 is Displayed” on page 148
z “Error No.: 1856 is Displayed” on page 148
z “Error No.: 2001 is Displayed” on page 149
z “Error No.: 2500 is Displayed” on page 149
z “For Windows Users” on page 149
If an error occurs when the machine is connected to a computer