ClearOne Converge Pro Serial - Manual (Page 71)

298
TRANSCANCEL – Cancels a Transferred Call
This command interrupts/stops a transfer. There is no query for this command.
Command Form Details:
DEVICE TRANSCANCEL
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 26 (Z) -
Reserved Unsigned Short 2 0 -
TRANSCOMPLETE – Completes a Transferred Call
This command completes/concludes a transfer after the transfer has been initiated. There is no query for this
command.
Command Form Details:
DEVICE TRANSCOMPLETE
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 26 (Z) -
Reserved Unsigned Short 2 0 -
TRANSSTART – Initiate an Attended or Unattended Call Transfer
This command initiates a transfer of an established call to a new extension (defined by this command).
Command Form Details:
DEVICE TRANSSTART [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 26 (Z) -
Reserved Unsigned Short 2 0 -
Value String 44 1 – 44 Characters of ‘0’ – ‘9’, ‘*’, ‘#’ and ‘,’
(Null to query in text)
-
VE – VoIP Enable
This command selects (toggles) the hook status. This command is used to replace the XTE command for the
Z group when VoIP multi-line is enabled. See MULTILNEN and MULTILNSTAT. State tracking is provided by the
CALLSTATUS command
Command Form Details:
DEVICE VE
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 26 (Z) -
Reserved Zero 2 Zero -