ClearOne Converge Pro Serial - Manual (Page 47)

274
PASML – PA Sound Mask Level
This command selects/reports the sound mask level on a PA channel.
Command Form : DEVICE PASML [Amplitude]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 23 (J) -
Amplitude Signed Short 2 -60.00 – 20.00
(Null to query in text)
dB
PASMM – PA Sound Mask Mode
This command selects/reports the sound mask mode on a PA channel.
Command Form : DEVICE PASMM [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 23 (J) -
Value Unsigned Short 2 0 = Voice Mode
1 = Wideband Mode
(Null to query in text)
-
PASMT – PA Sound Mask Timer
This command selects/reports the timer on sound mask signal on a PA channel.
Command Form : DEVICE PASMT [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 23 (J) -
Value Unsigned Short 2 0 – 1440 (24 hours)
(Null to query in text)
Minutes
PATO – PA Thermal Overload
This indicates if a thermal overload condition is occurring on one of the power amplifier channels. This is Read-
Only, and is automatically generated if a overload occurs.
Command Form : DEVICE PATO [Bitmap]
Argument Type Size Values Units
Bitmap Hexa-
decimal
Integer 4
-
PBDIAL – Dial a PB Entry by Argument
This command dials a speed dial number by name. There is no query for this command.
Command Form : DEVICE PBDIAL
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Reserved Unsigned Integer 2 0 -
Label String 16 1 – 16 chars -