ClearOne Converge Pro Serial - Manual (Page 61)

288
XCALLDUR – Call Duration
This command indicates how long a call has lasted. If no call is in session, this will report 0. At the time of call
termination, this command will automatically be sent out reporting the duration. This command can be used to
replace the CALLDUR command for the R group.
Command Form : DEVICE XCALLERID
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Number String 44 1-44 Characters -
Name String 44 1-44 Characters -
XCALLERID – Reports Caller ID Information
This command reports Caller Identification Information. This command can be used to replace the CALLERID
command for the R group. This command is reportable only. It cannot be queried or set.
Command Form : DEVICE XCALLDUR
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Reserved Unsigned Short 2 0 -
Duration String 8 String of format HR:MN:SS -
XCHAIRO – Chairman Override Mode
This command selects/reports the setting of chairman override. This command can be used to replace the
CHAIRO command for the M group.
Command Form : DEVICE XCHAIRO [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
XCGROUP – Compressor Group
This command sets the compressor group for synchronized operation of the compressor. This command can be
used to replace the CGROUP command for the P group.
Command Form : DEVICE XCGROUP [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 5, 23 (P, J) -
Value Unsigned Short 2 0 = None
1 = Group 1
2 = Group 2
3 = Group 3
4 = Group 4
(Null to query in text)
-