ClearOne Converge Pro Serial - Manual (Page 19)

246
COMPRESS – Compressor Adjust
This command selects/reports the settings of the compressor.
Command Form : DEVICE COMPRESS [Threshold Ratio Attack Release Gain]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 5 (P) -
Threshold Signed Integer 1 -60 – 20
(Null to query in text)
dB
Ratio Unsigned Integer 1 1 – 20
Attack Unsigned Float 2 0.00 – 100.00 Ms
Release Unsigned Integer 2 100 – 2000 Ms
Gain Unsigned Float 4 0.00 – 20.00 dB
COMPSEL – Compression Select
This command selects/reports the compressor activation.
Command Form : DEVICE COMPSEL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 5 (P) -
Value Unsigned Integer 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
COUNTRY – Country Selection
This command sets / reports the country for telco compliance purposes.
Command Form : DEVICE COUNTRY [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 1 = US / Canada
2 = Europe
3 = Mexico
4 = Australia
5 = South Africa
6 = Japan
7 = Brazil
8 = South Korea
9 = China
10 = Singapore
11 = Taiwan
12 = New Zealand
13 = India
14 = Hong Kong
15 = Malaysia
16 = Argentina
(Null to query in text)
-
CTRLMASTER – Control Master Mode
This command reports the mode of the unit for SNMP control.
Command Form : DEVICE CTRLMASTER [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 1 = Master
2 = Slave
(Null to query in text)
-