ClearOne Converge Pro Serial User Manual
Page 48

275
PHONEBOOKADD – Adds an Entry to the Phonebook
This command saves an entry in the phonebook. There is no query for this command. No two entries can
share the same label. An argument error will be returned if an entry already exists. To change an entry, you
must first delete it and then add it again. If label is blank, the first 20 characters of the number will be used as the
label. The Number argument must not be blank. If an entry already exists with the assigned speed dial it will be
overwritten. The entries are alphabetized based on Label.
Command Form
: DEVICE PHONEBOOKADD
Argument
Type
Size
Values
Units
Speed Dial
Unsigned Integer
4
0 for not assigned to a speed dial
1 – 20
-
Number
String
44
1 – 44 chars ‘0’ – ‘9’, ‘*’, ‘#’
-
Label
String
16
1 – 16 chars
-
PHONEBOOKCNT – Counts Entries in the Phonebook
This command queries the number of entries in the phonebook. This command is query only.
Command Form
: DEVICE PHONEBOOKCNT
Argument
Type
Size
Values
Units
Value
Unsigned Integer
4
0 – 20
-
PHONEBOOKDEL – Deletes an Entry in the Phonebook
This command deletes an entry in the phonebook. There is no query for this command.
Command Form
: DEVICE PHONEBOOKDEL
Argument
Type
Size
Values
Units
Label
String
16
1 – 16 chars
-
PHONEBOOKREAD – Queries the Phonebook by Index
This command queries an entry in the phonebook. This command is query only.
Command Form
: DEVICE PHONEBOOKREAD
Argument Type
Size
Values
Units
Index
Unsigned Integer
2
0 – 19 (Must be less than the Number of Phone
Book Entries)
-
Speed Dial Unsigned Integer
2
0 for not assigned to a speed dial
1 – 20
(NULL to query in text)
-
Number
String
44
1 – 44 chars ‘0’ – ‘9’, ‘*’, ‘#’
-
Label
String
16
1 – 16 chars
-
PP – Phantom Power
This command selects/reports the setting of phantom power.
Command Form
: DEVICE PP
Argument Type
Size
Values
Units
Channel
Channel
1
See Groups and Channels
-
Group
Group
1
3 (M)
-
Value
Unsigned Integer
2
0 = Off
1 = On
2 = Toggle
(Null to query in text)
-