ClearOne Converge Pro Serial - Manual (Page 28)

255
FILTER – Filter Adjust
This command selects/reports the settings of a filter.
Command Form : DEVICE FILTER [Type Frequency Gain/Slope Bandwidth/
Subtype]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 5, 23, 29 (M, P, J, V) -
Node Unsigned
Integer 1 Group 3, 23, 29 1 – 4
-
Group 5 1 – 15
Type Unsigned
Integer 1 0 = None
1 = All Pass
2 = Low Pass
3 = High Pass
4 = Low Shelving
5 = High Shelving
6 = Parametric Equalizer
7 = CD Horn
8 = Bessel Crossover
9 = Butterworth Crossover
10 = Linkwitz-Riley Crossover
11 = Notch
(Null to query in text)
-
Frequency Unsigned
Float 4 Type 0 0 (Null in text)
Hz Type 1 – 6, 8 – 11 20.00 – 20000.00
Type 7 500.00 – 5000.00
Gain/Slope Signed Float 2 Type 0 – 3, 7, 11 0 (Null in text)
dB /
dB per
Octave
Type 4 – 6 -15.00 – 15.00
Type 8 – 9 12, 18, 24
Type 10 12, 24
Bandwidth/Subtype Unsigned
Float
2 Type 0 – 5, 7 0 (Null in text)
Octaves /
Type
Type 6, 11 0.05 – 5.00
Type 8 – 10 2 = Low Pass
3 = High Pass
FILTSEL – Filter Select
This command turns on and off the filters.
Command Form : DEVICE FILTSEL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 5, 23, 29 (M, P, J, V) -
Node Unsigned Integer 1 Group 3, 23, 29 1 – 4
0xFF for all (*
text)
-
Group 5 1 – 15
0xFF for all (*
text)
Value Unsigned Integer 1 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-