ClearOne Converge Pro Serial - Manual (Page 53)

280
RXBOOST – Receive Boost
This command selects/reports the receive boost status.
Command Form : DEVICE RXBOOST [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Value Unsigned Integer 2 0, 3, 6, 9, or 12
(Null to query in text)
dB
RXBSTEN – Receive Boost Enable
This command selects/reports the receive boost status.
Command Form : DEVICE RXBSTEN [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Value Unsigned Integer 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
SERECHO – Serial Echo
This command selects/reports the serial echo of the RS-232 port.
Command Form : DEVICE SERECHO [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
NOTE: The unit will return the updated state of the last selection in the same form as the
command.
SFTYMUTE – Safety Mute
This command selects/reports the state of the safety mute. Safety mute holds all outputs in a muted state. It used
for syncing to a site document to avoid feedback or blown speakers until the unit is in a settled state.
Command Form : DEVICE SFTYMUTE [Value]
Argument Type Size Values Units
Value Channel 4 0 = off
1 = on
2 = toggle
(Null to query in text)
-