ClearOne Converge Pro Serial - Manual (Page 43)

270
PAA – PA Adaptive Mode
This command selects/reports PA adaptive mode for the specified Mic.
Command Form : DEVICE PAA [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3 (M) -
Value Unsigned Integer 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
PACEN – PA Softclipper Enable
This command changes enables the softclipper function on a power amplifier channel.
Command Form : DEVICE PACEN [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 23 (J) -
Value Unsigned
Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
PAENERGY – PA Energy-saver mode
This command switches the 36-volt rails off and on for the power amplifier. It is intended to be used for a low
power or energy saving mode.
Command Form : DEVICE PAENERGY [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 23 (J) -
Value Unsigned
Short 2 0 = Energy Saver Mode OFF (Power Amp On)
1 = Energy Saver Mode ON (Power Amp Off)
(Null to query in text)
-
PAEQEN – PA EQ Filter Enable
This command enables the EQ filter on a PA Channel
Command Form : DEVICE PAEQEN [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 23 (J) -
Value Unsigned
Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-