ClearOne Converge Pro Serial - Manual (Page 42)

269
NLP – Non Linear Processing Adjust
This command selects/reports the setting of non-linear processing for each microphone channel.
Command Form : DEVICE NLP [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3 (M) -
Value Unsigned Integer 2 0 = Off
1 = Soft
2 = Medium
3 = Aggressive
(Null to query in text)
-
NOM – Number of Open Microphones Mode
This command selects/reports the setting of Number of Open Microphones (NOM) on output channels.
Command Form : DEVICE NOM [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 2, 16, 25 (J, O, T, K, D) -
Value Unsigned Integer 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
NTPSRV – NTP Network Time Server Address
This command selects/reports the IP addresses of the NTP Time Server the unit’s NTP client requests time status
from.
Command Form : DEVICE NTPSRV [Value 1 Value 2]
Argument Type Size Values Units
Value 1 IP Address 4 (Null to query in text) -
Value 2 IP Address 4 -
NULL – Null the Telephone Line
This command nulls the telephone line. There is no query for this command.
Command Form : DEVICE NULL
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Reserved 2 0 -
OFFA – Off Attenuation Mode
This command selects/reports the off attenuation value of a Mic channel.
Command Form : DEVICE OFFA [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3 (M) -
Value Unsigned
Float 2 0.00 – 60.00
(Null to query in text)
-