ClearOne Converge Pro Serial - Manual (Page 64)

291
XDTONELVL – Dial Tone Level
This command selects/reports the audible dial tone’s level. This command can be used to replace the DTONELVL
command for the R group. You can’t change level during a call.
Command Form : DEVICE XDTONELVL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Value Signed Short 2 -12.00 – 12.00
(Null to query in text)
dB
XGHOLD – Gate Hold Time Adjust
This command selects/reports the setting of hold time. This command can be used to replace the GHOLD
command for the M group.
Command Form : DEVICE XGHOLD [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value Unsigned Short 2 0.10 – 8.00
(Null to query in text)
S
XGMODE – Gating Mode
This command selects/reports the setting of gating mode. This command can be used to replace the GMODE
command for the M group.
Command Form : DEVICE XGHOLD [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value Unsigned Short 2 0.10 – 8.00
(Null to query in text)
-
XGOVER – Gating Override
This command selects/reports the setting of gating override. This command can be used to replace the GOVER
command for the M group.
Command Form : DEVICE XGOVER [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
XGRATIO – Gate Ratio Adjust
This command selects/reports the setting of the gate ratio. This command can be used to replace the GRATIO
command for the M group.
Command Form : DEVICE XGRATIO [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value Unsigned Short 2 0 – 50
(Null to query in text)
dB