ClearOne Converge Pro Serial - Manual (Page 65)

292
XGRPSEL – Gating Group Select
This command selects/reports which Gating Group a microphone input is assigned. This command can be used
to replace the GRPSEL command for the M group.
Command Form : DEVICE XGRPSEL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value Unsigned Short 2 See 4 (G) in Group and Channels
(Null to query in text)
-
XHOOK – Hook Flash
This command sends a hook flash. This command can be used to replace the HOOK command for the R group.
There is no query for this command.
Command Form : DEVICE XHOOK
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Reserved Unsigned Short 2 0 -
XHOOKD – Hook Flash Duration
This command selects/reports the hook flash duration. This command can be used to replace the HOOKD
command for the R group.
Command Form : DEVICE XHOOKD
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Reserved Unsigned Short 2 50 – 2000
(Multiples of 10 Ms only)
(Null to query in text)
Ms
XLOCALNUM – Local Number
This command sets or reports back the current value of the local number. This command can be used to replace
the LOCALNUM command for the R group.
Command Form : DEVICE XLOCALNUM [Number]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Reserved Unsigned Short 2 0 -
Number String 16 1 – 16 Chars of ‘0’ – ‘9’, ‘*’, ‘#’, ‘,’ -