ClearOne Converge Pro Serial - Manual (Page 30)

257
GMODE – Gating Mode
This command selects/reports the setting of gating mode.
Command Form : DEVICE GMODE [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3 (M) -
Value Unsigned Integer 2 1 = Auto
2 = Manual On
3 = Manual Off
(Null to query in text)
-
GOVER – Gating Override
This command selects/reports the setting of gating override.
Command Form : DEVICE GOVER [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3 (M) -
Value Unsigned Integer 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
GPIOSTATUS – General Purpose Status
This command sets the state of a General Purpose Status Pin.
Command Form : DEVICE GPIOSTATUS Pin Port [Value]
Argument Type Size Values Units
Pin Unsigned
Integer 1 1 – 24 (Only user definable status pins.
-
Port Unsigned
Integer 1 1 – 2
-
Value Unsigned
Integer 2 0 = High
1 = Low
2 = Toggle
(NULL to query in text)
-
GRATIO – Gate Ratio Adjust
This command selects/reports the setting of the gate ratio.
Command Form : DEVICE GRATIO [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3 (M) -
Value Unsigned Integer 2 0 – 50
(Null to query in text)
dB
GREPORT – Gate Report
This command selects/reports the mode of gate and audio presence status reporting.
Command Form : DEVICE GREPORT [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-