ClearOne Converge Pro Serial - Manual (Page 49)

276
PRESET – Preset Execution/Reporting
This command selects/reports the state of a preset.
Command Form : DEVICE PRESET [Value]
Argument Type Size Values Units
Channel Channel 1 0 (Binary)/Null (Text) = Query Last Preset Ran
See Groups and Channels
-
Group Group 1 13 (S) -
Value Unsigned Integer 2 0 = Set preset state to off
1 = Set state to on and execute if not already on
2 = Execute and return state to off
(Null to query current state in text)
-
PRGSTRING – Program String
This command sets/reports a programmed string.
COMMAND FORM : DEVICE PRGSTRING [Value]
Argument Type Size Values Units
ID Unsigned Integer 4 0 – 7 -
Value String 80 CLEAR = Clear current value
1 – 80 Chars
(Null to query in text)
Special Characters:
\a = alert
\b = backspace
\f = form feed
\n = new line
\r = carriage return
\t = horizontal tab
\v = vertical tab
\\ = backslash
-
PROXYSTAT – Proxy Registration Status
This command reports the registration status for the primary or secondary proxy. This command is only
queried, not set, and can be sent asynchronously.
Command Form : DEVICE PROXYSTAT
Argument Type Size Values Units
Index Channel Index 1 0 = Primary Proxy
1 = Secondary Proxy
-
Group Group 1 129 (No text group) -
Value Signed Float 2 0 = SIP Proxy Disabled
1 = SIP Proxy Registered
2 = SIP Proxy NOT Registered
-
PROXYTYPE – Set/Get Proxy Type
If the proxy server requires specific firmware changes to work with, this setting tells firmware what proxy server
type to work with.
Command Form : DEVICE PROXYTYPE
Argument Type Size Values Units
Const.
Channel Channel Const. 1 1
-
Group Group 1 131 -
Value Signed Float 2 0 – Default, means no specific changes required.
1 – Cisco Proxy (CCM7)
-