ClearOne Converge Pro Serial - Manual (Page 67)

294
XRINGERLVL – Audible Ring Level
This command selects/reports the audible ring’s level. This command can be used to replace the RINGERLVL
command for the R group. You cannot change this value while the phone is ringing.
Command Form : DEVICE XRINGERLVL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Value Unsigned Short 2 -12.00 – 12.00 (dB)
(Null to query in text)
dB
XRINGERSEL – Audible Ring Melody Selection
This command sends/reports the audible ring melody. This command can be used to replace the RINGERSEL
command for the R group. You can’t change the value while phone is ringing.
Command Form : DEVICE XRINGERSEL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Value Unsigned Short 2 1 – 5
(Null to query in text)
-
XRINGERTEST – Audible Ring Melody Test
This command plays the current audible ringer melody. This command can be used to replace the RINGERTEST
command for the R group. This command is executable only. There is no query.
Command Form : DEVICE XRINGERTEST
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Reserved Unsigned Short 2 0 -
XSLVL – Speech Level Control
This command selects/reports the setting of Speech Level Control. This command can be used to replace the
SLVL command for the M group.
Command Form : DEVICE XSLVL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
XSPEEDDIAL – Speed Dialing
This command dials a speed dial number. This command can be used to replace the SPEEDDIAL command for
the R group.
Command Form : DEVICE XSPEEDDIAL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Value Unsigned Short 2 1 – 20
(Null to query in text)
-