ClearOne Converge Pro Serial - Manual (Page 17)

244
CALLDUR – Call Duration
This command returns current call duration. If no call is active, this command returns 0. At the time of call
termination, this command will automatically be sent out to report call duration. This command is read only.
Command Form : DEVICE CALLDUR
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Reserved 2 0 -
Duration String 8 String of format HR:MN:SS -
CALLERID – Reports Caller ID Information
This command reports Caller Identification Information. This command is reportable only. It cannot be
queried or set.
Command Form : DEVICE CALLERID
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Reserved Unsigned Integer 2 0 -
Number String 16 1 – 16 chars -
Label String 16 1 – 16 chars -
CGROUP – Compressor Group Select
This command selects/reports the setting of the compressor group.
Command Form : DEVICE CGROUP [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 5 (P) -
Value Unsigned Integer 2 0 = none
1 – 4
(Null to query in text) Com-
pressor
Group
CHAIRO – Chairman Override Mode
This command selects/reports the setting of chairman override.
Command Form : DEVICE CHAIRO [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3 (M) -
Value Unsigned Integer 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-