ClearOne Converge Pro Serial - Manual (Page 27)

254
FERNG – Feedback Elimination Ring Elimination Mode
This command enables/disables the Ring Elimination Mode on the feedback eliminator.
Command Form : DEVICE FERNG [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 23 (J) -
Reserved Zero 2 0 = 0ff
1 = On
2 = Toggle
(Null to query in text)
-
FES – Feedback Elimination Setup
This command reset the feedback eliminator and initiates an automatic training cycle. When the automatic setup
is complete, the FESC (Feedback Elimination Setup Complete) command will be issued. There is no query
associated with this command.
Command Form : DEVICE FES [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 23 (J) -
Reserved Zero 2 Zero -
FESC – Feedback Elimination Setup Complete
This command reports when the automatic feedback eliminator setup training cycle is in progress. The training
cycle is started using the command FES (Feedback Elimination Setup). This is a query only command.
Command Form : DEVICE FESC [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 23 (J) -
Value Unsigned Short 2 0 = Setup Complete
1 = Setup in Progress
(Sent Null, Value Returned)
-