ClearOne Converge Pro Serial - Manual (Page 23)

250
ENETDHCP – Ethernet DHCP Selection
This command selects/reports the use of DHCP of the Ethernet port on the unit.
Command Form : DEVICE ENETDHCP [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
ENETDNS – Ethernet DNS Selection
This command selects/reports the use of DNS of the Ethernet port on the unit.
Command Form : DEVICE ENETDNS [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
ENETDNSA – Ethernet DNS Server Address
This command selects/reports the DNS server IP address of the Ethernet port on the unit.
Command Form : DEVICE ENETDNSA [Value]
Argument Type Size Values Units
Value IP Address 4 (Null to query in text) -
ENETDNSA2 – Ethernet DNS Server Address 2
This command selects/reports the alternate DNS server IP address of the Ethernet port on the unit.
Command Form : DEVICE ENETDNSA2 [Value]
Argument Type Size Values Units
Value IP Address 4 (Null to query in text) -
ENETDOMAIN – Ethernet Domain Argument
This command selects/reports the Domain Argument of the Ethernet port on the unit.
Command Form : DEVICE ENETDOMAIN [Value]
Argument Type Size Values Units
Value String 64 (Null to query in text) -
ENETGATE – Ethernet Default Gateway Address
This command selects/reports the default gateway of the Ethernet port on the unit.
Command Form : DEVICE ENETGATE [Value]
Argument Type Size Values Units
Value IP Address 4 (Null to query in text) -
ENETSUBN – Ethernet Subnet Mask
This command selects/reports the Subnet mask of the Ethernet port on the unit.
Command Form : DEVICE ENETSUBN [Value]
Argument Type Size Values Units
Value IP Address 4 (Null to query in text) -