ClearOne Converge Pro Serial - Manual (Page 31)

258
GRPSEL – Gating Group Select
This command selects/reports which Gating Group a microphone input is assigned.
Command Form : DEVICE GRPSEL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3 (M) -
Value Channel 2 See 4 (G) in Groups and Channels
(Null to query in text)
-
HDAEC – Enables/Disables HD AEC mode
This command enables the HD AEC Mode of a Beamforming Microphone Array.
Command Form : DEVICE HDAEC [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 29 (V) -
Value Unsigned
Short 2 0 = Off
1 = On
2 = Toggle
(Null to Query in Text)
-
HDAECMODE – Set/Report HD AEC mode
This command sets the HD AEC Mode of a Beamforming Microphone Array as Mono or Stereo.
Command Form : DEVICE HDAECMODE
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Unsigned
Short 1 29 (V)
-
Value Unsigned
Short 2 1 = Mono – One reference per Beamforming Mic
2 = Stereo – Two references per Beamforming Mic
(Null to Query in Text)
-
HDDREFSEL1 – Reference Select for Mono Channel Acoustic Echo Cancellation Block
This command Sets/Reports Reference for Mono AEC Block.
Command Form : DEVICE HDREFSEL1 [Ref. Group][Ref. Channel]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 29 (V)
Reference
Group Group 1 8 (A) (Null to query in text)
-
Reference
Channel Channel 1 See Groups and Channels
-
HDDREFSEL2 – Reference Select for Stereo Channel Acoustic Echo Cancellation Block
This command Sets/Reports Reference for Stereo AEC Block.
Command Form : DEVICE HDREFSEL2 [Ref. Group][Ref. Channel]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 29 (V) -
Reference
Group Group 1 8 (A) (Null to query in text)
Reference
Channel Channel 1 See Groups and Channels
-