ClearOne Converge Pro Serial User Manual
Page 24
251
ENETVLAN – Enable VLAN Tagging
This command enables/disables VLAN tagging. Valid on VH20 ONLY. Change requires reboot to become
effective.
Command Form
: DEVICE ENETVLAN [Value]
Argument Type
Size
Values
Units
Value
Unsigned
Integer
4
0 = VLAN Tagging Off
1 = VLAN Tagging On
2 = Toggle
(Null to query in text)
-
ENETVLANID – VLAN ID
This command set/reports VLAN Tag ID for all Ethernet packets (including SIP). Valid on VH20 ONLY. Change
requires reboot to become effective.
Command Form
: DEVICE ENETVLANID [Value]
Argument Type
Size
Values
Units
Value
Unsigned
Integer
4
1 – 4094
(Null to query in text)
-
ENETVLANPRI – VLAN Priority
This command sets/reports the VLAN Tagging Priority for all IP packets. Valid on VH20 ONLY. Change requires
reboot to become effective.
Command Form
: DEVICE ENETVLANPRI [Value]
Argument Type
Size
Values
Units
Value
Unsigned
Integer
4
0 – 7
(Null to query in text)
-
EREF – Expansion Bus Reference
This command selects an output or reports which output is the expansion bus reference.
Command Form
: DEVICE EREF
Argument Type
Size
Values
Units
Channel
Channel
1
See Reference Channels in Groups and Channels
-
Group
Group
1
8 (A, E)
-
Value
Channel
1
0 = none
See 2, 20 (O, B) in Groups and Channels
(Null to query in text)
-
Value
Group
1
0 for none or 2, 20 (N for none or O, B)
-
EVENT – Run Scheduled Event
This command manually runs a scheduled event on a unit. There is no query associated with this command.
Command Form
: DEVICE EVENT
Argument Type
Size
Values
Units
Channel
Channel
1
1 - 10
-
Group
Group
1
21 (Q)
-
Reserved
Unsigned Short
2
0
-