ClearOne Converge Pro Serial - Manual (Page 32)

259
HDNLP – Non Linear Processing Adjust
This command selects/reports the setting of the Non-linear processing for each microphone channel. This
command can be used to replace the NLP command for the M group.
Command Form : DEVICE HDNLP [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value 2 0 = Off
1 = Soft
2 = Medium
3 = Aggressive
(Null to query in text)
-
HOOK – Hook Flash
This command sends a hook flash. There is no query for this command.
Command Form : DEVICE HOOK
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Reserved 2 0 -
HOOKD – Hook Flash Duration
This command selects/reports the hook flash duration.
Command Form : DEVICE HOOKD [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Value Unsigned Integer 2 50 – 2000
(Multiples of 10 Ms only)
(Null to query in text)
Ms
LABEL – Label
This selects/reports the label of the specific channel or the unit.
Command Form : DEVICE LABEL [In/Out] [Value]
Argument Type Size Values
Channel Channel 1 See Groups and Channels
Group Group 1 1, 2, 3, 4, 5, 6, 7, 8, 12, 13, 14, 16, 17, 20, 25, 26
(H, I, J, O, M, G, P, E, L, A, F, S, C, T, R, B, K, Z,
D, U, V)
Input / Output to
Matrix Unsigned Integer 2 Groups all but 6 0
Groups 6 0 = output
1 = input
Label String 20 1 – 20 characters
CLEAR = clear the label
(Null to query in text)
LCDCONTRAST – LCD Contrast
This command selects/reports the LCD Contrast Setting.
Command Form : DEVICE LCDCONTRAST [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 0 (lightest) – 63 (darkest)
(Null to query in text)
-