Metrohm 844 UV/VIS Compact IC - Manual (Page 83)

3.3 Settings
844 UV/VIS Compact IC / Gebrauchsanweisung 8.844.1051
71
Event Events for automatic remote signal output:
Inject Switching of the injection valve to the "INJECT"
position.
Fill Switching of the injection valve to the "FILL"
position.
Pump stop (P max/min)
Pump stopped because pressure limits are
exceeded.
Hardware error Hardware error detected at the 844 UV/VIS
Compact IC (high-pressure pump, injection
valve, or peristaltic pump not working correctly).
Alarm leak detector Internal leak.
PowerOn values Output lines 1… 8 will be set to the values
defined here after the instrument has been
switched on or after an emergency stop with
Shutdown hardware .
Selection: 0 , 1
Pulse length
Length of a pulse in ms.
Alarm stops
The Alarm stops tab of the hardware settings window defines the events
for which the instrument is stopped immediately. At an alarm stop, high-
pressure pump and peristaltic pump are stopped immediately, the
running determination and the active sample queue are also stopped.