Metrohm 844 UV/VIS Compact IC - Manual (Page 73)

3.2 Measuring operation
844 UV/VIS Compact IC / Gebrauchsanweisung 8.844.1051
61
Assign data sources
A data source is assigned to each of these data recorders. Click on one
of the data recorders with the right-hand mouse key, and select
Setup .
The RECORDER window opens.
Click on the lower button. The DATA SOURCE window opens.
Select one of the data sources that has not been previously connected,
and draw it on to the right-hand side by keeping the left-hand mouse
key pressed down:
Click on . The connected data source is shown in the RECORDER
window:
Click on and assign a data source to each data recorder.
3.2.3 Connect a system
The selected system must be linked to the workplace for controlling the
instrument and starting determination processes. Systems are linked by
selecting
SYSTEM / Control / Connect to workplace (see also Software
Instructions for Use «IC Net 2.3», Section 4.3.1).