Metrohm 844 UV/VIS Compact IC - Manual (Page 76)

Table of contents
Pump pressure, MPa Displays the currently measured pressure of the
high-pressure pump (units depend on the
settings made under IC NET / Global
preferences ).
Valve Live display of the position of the injection
valve.
Remote lines Live display of the status of the 8 remote lines.
Column temp., °C Live display of the temperature in the column
oven.
Controls
On the subtab Controls injection valve 46/60., peristaltic pump 49, high-
pressure pump 27/54, column heating 115 and remote lines can be
manually controlled. In addition, the parameters for the high-pressure
pump and column heating temperature can also be set:
Valve Injection valve
Switch injection valve to "Inject" position.
Switch injection valve to "Fill" position.
Peristaltic pump Peristaltic pump
Start peristaltic pump (only enabled, with
versions 2.844.0020 or 2.844.120).
Stop peristaltic pump (only enabled, with
versions 2.844.0020 or 2.844.120).
IC pump High pressure pump
Start high pressure pump.
Stop high pressure pump.
Flow, mL/min Set value for flow rate of IC pump.
Entry range: 0.20 ... 2.50 mL/min