Metrohm 844 UV/VIS Compact IC - Manual (Page 81)

3.3 Settings
844 UV/VIS Compact IC / Gebrauchsanweisung 8.844.1051
69
Name (1 st column) User-definable name of the remote command
(e.g. Start_838 ).
Remote command (2 nd column)
Setting the remote output lines 1…8.
Selection: 0 (line off, inactive, open)
1 (line on, active, 0 V)
p (pulse)
* (leave line in current status)
For entry of the first value, enter 1 , 0 , p or * . For
entry of the other values, move the cursor in
front of the value to be changed and enter
1 , 0 ,
p or * .
Add new remote command.
Delete selected remote command.
Activate the defined remote commands for
insertion into the time program.
Configuration
The Configuration tab in the system settings window contains
configuration settings for the 844 UV/VIS Compact IC.
Startup with hardware The activated devices will be started with Startup
hardware or at the start of a determination.
UV lamp If this option is switched off the UV lamp will not
be switched on at Startup hardware or at the start
of a determination.
VIS lamp If this option is switched off the VIS lamp will not
be switched on at Startup hardware or at the start
of a determination.
Column oven If this option is switched off the column heating
will not be switched on at Startup hardware or at
the start of a determination.