Metrohm 844 UV/VIS Compact IC - Manual (Page 75)

3.3 Settings
844 UV/VIS Compact IC / Gebrauchsanweisung 8.844.1051
63
(on the tab Configuration ) will be set on the 844 UV/VIS Compact IC.
Depending on the Start mode setting the time program and data
recording will either be started immediately (for Start with determination )
or only when the injection valve is switched to the position "INJECT" (for
Start with inject ).
Stop
If
SYSTEM / Control / Stop determination
is selected then the current
determination is stopped. Data recording and the time program are
stopped immediately.
Alternatively the determination can also be stopped by clicking on in
the chromatogram window. In this case the user will always be asked if
the recorded baseline is to be saved or not.
3.3 Settings
3.3.1 Instrument control for connected system
A double-click on the device symbol or selecting the menu item Open
with the right-hand mouse key opens the window for the system
settings. For a connected system the tab
Manual with the subtab Current
State appears on which the current values are shown.
Current state
Channel 1 abs, mAU Live display of the absorption in channel 1.
Channel 2 abs , mAU Live display of the absorption in channel 2.
Channel 3 abs, mAU Live display of the absorption in channel 3.
Ch1/Ch2 Live display of the absorption ratio of channel 1
and channel 2.
VIS Lamp Live display of the status of the VIS lamp.
UV Lamp Live display of the status of the UV lamp.