Metrohm tiBase 1.1 - Manual (Page 98)

3.2 Administration
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
90 ￭￭￭￭￭￭￭￭
tiBase 1.1
Remove password after signature
If this check box is activated, then the password must be entered again
after each signature.
Selection on | off
Default value off
Recommended setting: on (can no longer be edi-
ted)
Sign each determination separately
If this check box is activated, then each determination selected in the
determination overview must be signed individually.
Selection on | off
Default value off
Recommended setting: on (can no longer be edi-
ted)
3.2.2.6 Default reasons
Tab: Configuration ▶ &Tools ▶ Security settings ▶ Default reasons
The reasons which must be entered when signing determinations or
changing determinations are defined on the Default reasons tab.
Category
Selection of the category for which the reasons are to be defined.
Selection Signature level 1 | Signature level 2 | Modifi-
cation of determinations
Default value Signature level 1
Reasons
Display of the reasons defined for the selected category.
Entry 64 characters
Move text upward (modifies sequence).
Move text downward (modifies sequence).
[New]
Add a new reason.
[Edit]
Edit the selected reason.