Metrohm tiBase 1.1 - Manual (Page 38)

2.4 Formula editor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
30 ￭￭￭￭￭￭￭￭
tiBase 1.1
2.4.3.7 System variables
Dialog window: Formula Editor ▶ Variables
System variables are general variables which are adopted in the determi-
nation at the start of the determination. They are assigned neither to indi-
vidual commands nor to determinations. The Variables field of the For-
mula editor lists all System variables which are available for the current
method.
Syntax
'SV.Variable name'
Examples: 'SV.SIN', 'SV.SLI'
You can select the system variables directly in the formula editor under
Variables/System variables in order to avoid syntax errors.
Available system variables
Variable
name
(PC-Control)
Variable
name
( tiBase 1.1)
Description Data type
%AC .ACC Autostart actual counter. Number
%AD .ACE Autostart setpoint counter. Number
%RN .RUN Sample number. Number
%SE .SEN Indication whether the end of
the sample table has been
reached (1 = yes, 0 = no). Number
%AS .SIN Indication whether the determi-
nation has been started as a sin-
gle determination or within a
series (1 = single determina-
tion, 0 = series determina-
tion). Number
%SL SLI Sample table actual line. Number
SNT .STA Indication whether the statistics
is activated (1 = yes, 0 = no. Number
%SC .STC Start counter Number
%SS Sample table status
1 = Sample table on
0 = Sample table off
Number