Metrohm tiBase 1.1 - Manual (Page 108)

3.3 Configuration data
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
100 ￭￭￭￭￭￭￭￭
tiBase 1.1
Security settings
on | off (Default value: on)
Import security settings (see Chapter 3.2.2.1, page 83).
User administration
on | off (Default value: on)
Import user administration (see Chapter 3.2.1.1, page 75).
[OK]
The selected data is imported.
3.3.2 Back up/restore
3.3.2.1 Backing up configuration data automatically
Dialog window: Configuration ▶ File ▶ Save ▶ Automatically ▶ Backup configura-
tion data automatically
Automatic backup
on | off (Default value: off)
If this check box is activated, then the configuration database is saved
automatically to the defined backup directory at the desired time interval.
The entire configuration database is saved at this time.
If this check box is deactivated, then the following parameters cannot be
edited.
Last backup
Display of date and time of the last configuration data backup.
Next backup
Date and time at which the next backup is to be carried out. opens
the Next backup window to select the date (see Chapter 2.5.1, page
68).
Default value Last backup + 1 month
Interval
Entry of the time interval after which an automatic backup will take place.
With each automatic or manual backup, the interval entered here will be
added to the date of the Last backup and shown in the Next backup
field.
Input range 1 - 999
Default value 1