Metrohm tiBase 1.1 - Manual (Page 41)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 General program functions
tiBase 1.1
￭￭￭￭￭￭￭￭ 33
￭ MEAS T
Temperature measurement.
￭ MEAS U
Potentiometric voltage measurement.
￭ MEAS Upol
Amperometric measuremen with selectable polarization current.
￭ MET Ipol
Monotonic equivalence point titration with voltametric measurement
(selectable polarization current).
￭ MET pH
Monotonic equivalence point titration with potentiometric pH meas-
urement.
￭ MET U
Monotonic equivalence point titration with potentiometric voltage
measurement.
￭ MET Upol
Monotonic equivalence point titration with amperometric measure-
ment (selectable polarization voltage).
￭ SET pH
Endpoint titration with potentiometric pH measurement.
￭ SET U
Endpoint titration with potentiometric voltage measurement.
￭ SET Ipol
Endpoint titration with voltametric measurement (selectable polariza-
tion current).
￭ SET Upol
Endpoint titration with amperometric measurement (selectable polari-
zation voltage).
￭ STAT pH
STAT titration by keeping the measured value pH constant.
￭ STAT U
STAT titration by keeping the measured value U constant.
2.4.4 Operators/functions
2.4.4.1 Operators/functions - Overview
Dialog window: Formula editor ▶ Operators/Functions