Metrohm tiBase 1.1 - Manual (Page 239)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiBase 1.1
￭￭￭￭￭￭￭￭ 231
Input range 0 - 5
Default value 2
Assignment
Assign a result to a defined result column RS01 … RS25. This order
specifies in which of the 25 available result columns in the determination
overview the result is being added to. Per calculation the result columns
RS01 ... RS25 are available. Only the columns still free are made availa-
ble. With none the result will not be assigned to any column.
Input range RS01 - RS25
Default value none
Statistics
on | off (Default value: on)
If this check box is activated, the mean value and the absolute and relative
standard deviation are calculated for the result. This field is only active
when the statistics is enabled in the method of the imported determina-
tion (i.e. the statistics can only then be disabled and enabled again, if it
has already been enabled in the method).
Description
Freely selectable description of the result.
Entry 1000 characters
Default value empty
Functions
[New]
Opens the dialog window Result 'Resultname' - RS# (see Chapter
4.5.2.6.4.7, page 244). A maximum of 81 result calculations can be gen-
erated. Afterwards, the button [New] will be disabled.
[Delete]
Deletes the selected calculations from the table.
[Properties]
Opens the dialog window Result 'Result name' - RS# in order to edit
calculations selected in the table (see Chapter 4.5.2.6.4.7, page 244).
4.5.2.6.4.4 Modifications - Statistics
Tab: Database ▶ Determination overview ▶ Determinations ▶ Reproc-
ess... ▶ Reprocessing ▶ Modifications ▶ Statistics
On the tab Statistics the single results for the statistics calculation can
subsequently be switched on and off.