Metrohm tiBase 1.1 - Manual (Page 191)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiBase 1.1
￭￭￭￭￭￭￭￭ 183
Field separator
Selection of the field separator.
Selection ; | , | Tab
Default value ;
Record separator
Selection of the data set separator (CR = Carriage return, LF = Line feed).
Selection CR/LF | CR | LF
Default value CR/LF
Header
on | off (Default value: on)
If this check box is activated, the column headers are exported at the
beginning of the export file.
4.4.4.2.4 Export template - Options for measurement point list
Dialog window: Database ▶ Tools ▶ Templates ▶ Export templates... ▶ Export
templates ▶ [Properties] ▶ Export template ▶ [Options] ▶ Options for measuring
point list
With [Options] in the Properties window for export templates the dialog
window Options for measurement point list opens in which the sepa-
rators can be defined.
Field separator
Selection of the field separator.
Selection ; | , | Tab
Default value ;
4.4.4.2.5 Export template - Request at file export
Dialog window: Database ▶ Tools ▶ Templates ▶ Export templates... ▶ Export
templates ▶ [Properties] ▶ Export template
If in the properties of the export template under File name the option
Request on each export has been selected (see Chapter 4.4.4.2.1,
page 179), then before the export of a determination the dialog File
export is displayed.
Target directory
Shows the target directory for the export file, which has been defined in
the properties of the export templates (see Chapter 4.4.4.2.1, page 179)
used.