Metrohm tiBase 1.1 - Manual (Page 107)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Configuration
tiBase 1.1
￭￭￭￭￭￭￭￭ 99
[OK]
The Save dialog window for saving data, in which the name and directory
for the export file must be entered, opens. The selected configuration
data is then saved in a file with the extension .mcfg.
3.3.1.2 Importing configuration data
Dialog window: Configuration ▶ File ▶ Import… ▶ Import configuration data
With File ▶ Import... and after selection of the *.tcfg file to be impor-
ted, the Import configuration data dialog window opens in which the
following parts of the configuration database can be selected for import:
Note
Data that is not present in the export file cannot be selected.
Configuration views
on | off (Default value: on)
Import saved configuration views (see Chapter 4.1.7, page 119).
Database views
on | off (Default value: on)
Import saved database views (see Chapter 4.1.7, page 119).
Control chart templates
on | off (Default value: on)
Import saved control chart templates (see Chapter 4.4.3.1, page 174).
Curve overlay templates
on | off (Default value: on)
Import saved curve overlay templates (see Chapter 4.4.2.1, page 169).
Export template
on | off (Default value: on)
Export the saved export template.