Metrohm tiBase 1.1 - Manual (Page 235)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiBase 1.1
￭￭￭￭￭￭￭￭ 227
Closing the reprocessing window
The Reprocessing dialog window is closed with [OK], [Cancel] or with
the Windows button for closing.
Note
The reprocessing window cannot be closed while the recalculation
process is still running.
4.5.2.6.2 Reprocessing - Window
Dialog window: Reprocessing
Subwindows
The Reprocessing dialog window contains the following two subwind-
ows that can be enlarged and reduced by dragging the separating bar
between them:
￭ Modifications
Modification of variables, method, statistics, curve evaluation
￭ Result view
Shows the current results
Functions
If determinations have been modified in the Modifications subwindow,
then the following functions can be triggered:
[Recalculate]
Recalculates the selected determination(s) with the modifications on varia-
bles, method, statistics or curve evaluation made in the Modifications
subwindow.
A progress bar is shown during recalculation. Recalculation can be abor-
ted by clicking on next to the progress bar. The results of this recalcula-
tion are entered automatically in the Result view subwindow.
This button is disabled as long as no modifications have been made. After
the recalculation further data can be modified and then recalculation trig-
gered again.
[Reset]
Reset all modifications that were made but not yet saved during reproc-
essing to the original data and results.
This button is disabled for as long as no modifications have been made or
when the recalculation has not yet been triggered.