Metrohm tiBase 1.1 - Manual (Page 296)

4.8 Curves subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
288 ￭￭￭￭￭￭￭￭
tiBase 1.1
Note
With curves, for which the distance between to measuring points is
smaller than 5 pixels, the separate measuring points are not displayed
anymore, even if a symbol has been selected. In this case, the graphics
window can eventually be enlarged in order to display the symbols
again.
Symbol color
Selection of the color for the measuring point symbol.
Selection 13 colors | pink
Default value pink
Smoothing
Smoothing
on | off (Default value: on)
Enables/disables the smoothing for curves.
Smoothing factor x axis
Factor for smoothing on the x axis.
Input range 0.01 - 1000
Default value 0.01
Smoothing factor y-axis
Factor for smoothing on the y axis.
Input range 0.01 - 1000
Default value 0.01
4.8.3.5 Curve properties - Options
Dialog window: Database ▶ Curves ▶ Properties curves # ▶ Options
Options for graphical display of curves.
Command type
Selection of the command type for which the curve properties are to be
defined. The curve properties defined for each command type are saved
per curve window and per client.
Selection DET | MET | SET | KFT | KFC | BRC | STAT |
MEAS | DOS
Default value DET