Metrohm tiBase 1.1 - Manual (Page 93)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Configuration
tiBase 1.1
￭￭￭￭￭￭￭￭ 85
Selection on | off
Default value off
Recommended setting: on (can no longer be edi-
ted)
Password monitoring by tiBase
If this option is switched on, then the password will be monitored by
tiBase in accordance with the subsequent parameters.
Selection on | off
Default value on
Recommended setting: on (can no longer be edi-
ted)
Password monitoring by Windows
If this option is switched on, then the password will be monitored in
accordance with the parameters defined in Windows. The parameters for
password protection are in this case deactivated.
Selection on | off
Default value off
Recommended setting: off (can no longer be edi-
ted)
Caution
In order to prevent an unwanted login by means of the Guest user cat-
egory that is defined by default in Windows when performing password
monitoring with Windows, it is imperative that this also be assigned a
password or (even better) be deactivated.
Caution
If this option is switched on, then the user names in Windows and
tiBase must necessarily match, because otherwise the user will no lon-
ger be able to log in to tiBase. In order to ensure this, once this selec-
tion has been made, the Test login dialog window (see Chapter
3.2.2.3, page 88) appears in which the logged-in user must log in
with his or her Windows password. If this test login fails, then the
Security settings dialog window will remain open.