2 method variables, Method vari- ables – Metrohm tiBase 1.1 User Manual
Page 29
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 General program functions
tiBase 1.1
￭￭￭￭￭￭￭￭
21
Name
Syntax
Description
'SV.Variable
identification'
System variables are general varia-
bles which are adopted in the
determination at the start of the
determination.
'CV.Name'
Common variables are global varia-
bles. Depending on the device, the
names are set or can be defined by
the user.
Enter variables
Variables must always be entered and ended with an apostrophe ' (e.g.
'MV.myVariable').
Note
When using variables, always observe their data type (Number, Text
or Date/Time).
2.4.3.2
Method variables
Tab: Database
▶ Determinations ▶ Reprocessing ▶ Variables
Method variables include the variables FCT (factor) and DIV (divisor).
Syntax
'MV.Variable name'
Examples: 'MV.FCT' and 'MV.DIV'
Occurence
These two variables occur in the formula saved in the 870 KF Titrino plus.
By modifying these variables the result can be indicated as different con-
centration units (mg/mL, ppm etc.).
Method variables
Variable
name
Description
Data type
FCT
Conversion factor for the calculation for-
mula
Number
DIV
Divisor for the calculation formula
Number