Metrohm tiBase 1.1 - Manual (Page 36)

2.4 Formula editor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28 ￭￭￭￭￭￭￭￭
tiBase 1.1
Variable
name
(PC-Control)
Variable
name
( tiBase 1.1)
Description Command
.MSP .SVM Start volume measured value
(volume which was added
according to the start measured
value given in the start condi-
tions) in mL DET, MET
.MSS .SVS Start volume measured value
(volume that was added accord-
ing to the start condition "start
slope") in mL DET, MET
.MSV .SVT Total start volume (volume that
was added in dependence on all
three start conditions) in mL DET, MET, SET, KFT, STAT
.TITER .TITER Titer value of the solution used
for the command (number) DET, MET, SET, KFT, STAT,
STDADD dos, STDADD
auto, ADD, DOS, LQH
.MVA .VAR Variance of the result calculated
from the standard addition curve STDADD
.MCV .VOL Dosed volume STDADD, ADD, LQH
1) HNP = Half neutralization potential
2.4.3.5 Result variables
Dialog window: Formula Editor ▶ Variables
Result variables are method-specific and are defined in the CALC com-
mand of the method. The Variables field of the Formula editor lists all
Result variables which are available for the current method.
Syntax
'RS.Result name.Variable identification'
Examples: 'RS.RS01.VAL' (='RS.RS01'), 'RS.testTime.UNI'
You can select the method variables directly in the formula editor under
Variables
▶ Result Variables in order to avoid syntax errors.
Result variables
Variable
name
(PC-Control)
Variable
name
( tiBase 1.1)
Description Command
.R1 to .R9 [.VAL] Result value ( .VAL optional;
number) CALC
SSA# .ASD Absolute standard deviation for
the result (number) CALC