beautypg.com

Rockwell Automation AADvance Controller Safety Manual User Manual

Page 19

background image


Document: 553630
ICSTT-RM446K-EN-P Issue: 10

_C

1-9

CSA C22.2 No 142-M1987, Process Control equipment, Edition 1 -

Revision date 1990-09-01

Products Covered

The products investigated and approved:
Programmable Logic Controllers Models: 9110 Processor Module;

9401/2 Digital Input Module; 9431/2 Analogue Input Module; 9451 Digital
Output Module; 9482 Analogue Output Module.
Listed Accessories for use with PLCs: 9100 Processor Backplane, 9300

I/O Backplane, 9801 Digital Input Termination Assembly, Simplex; 9802
Digital Input Termination Assembly, Dual; 9803 Digital Input Termination

Assembly, TMR; 9831 Analogue input Termination Assembly, Simplex;

9832, Analogue Input Termination Assembly, Dual; 9833 Analogue Input

Termination Assembly, TMR; 9851 Digital Output Termination
Assembly, Simplex ; 9852 Digital Output Termination Assembly, Dual;

9881 Analogue Output Termination Assembly, Simplex; 9882 Analogue

Output Termination Assembly, Dual.

File No: E251761

The AADvance controller investigation and approval is contained in the

following file certifications:
NRAG.E251761: Programmable Controllers for Use in Hazardous

Locations Class I, Division 2, Groups A, B, C and D.
The products have been investigated using requirements contained in the

following standards:

ANSI/ISA 12.12.01-20007, Nonincendive Electrical Equipment for use

in Class I and II, Division 2 and Class III, Division 1 and 2 Hazardous

Locations.

UL508, Industrial Control Equipment, Seventeenth edition, with

revisions through and including April 15, 2010.

NRAG7.E251761: Programmable Controllers for Use in Hazardous
Locations Certified for Canada; Class I, Division 2, Groups A, B, C and D
The products have been investigated using requirements contained in the

following standards:

CSA C22.2 No 213-M1987, Nonincendive Control Equipment for

Use in Class I, Division 2, Hazardous Locations.

CSA C22.2 No 142-M1987, Process Control equipment, Edition 1 -

Revision date 1990-09-01

Products Covered

The products investigated and approved: