Rockwell Automation AADvance Controller Safety Manual - Manual (Page 17)

 
Document: 553630
ICSTT-RM446K-EN-P Issue: 10
_C
1-7
Associated Documents
The following documents are associated with the safety requirements
applicable to the AADvance system. Further supporting information is
available on the TÜV web site.
PFH and PFD Data
The PFH and PFD data is provided in a separate document - Doc No:
553847 - PFH
avg
and PFD
avg
Data for AADvance Controllers.
Table 2: Reference Documents
Document Title
IEC 61508, Part 1-7:1998-2000 Functional safety of electrical/electronic programmable
safety-related systems
IEC 61511-1:2004 Functional-safety: Safety instrumented systems for the
process industry sector
ANSI ISA 84.00.01:2004
(IEC61511-2 Mod) Functional Safety: Safety instrumented systems for the
process industry sector.
EN 61131-2:2007 Programmable controllers – Part 2: Equipment
requirements and tests
NFPA 72:2007 National fire alarm and signalling code
NFPA 85:2007 Boiler and combustion systems hazard code.
NFPA 86:2007 Standards for ovens and furnaces
EN50156-1:2004 Electrical equipment for furnaces and ancillary
equipment: Requirements for application design and
installation
EN54-2:1997,A1:2006 Fire alarm control panels
UL508 Industrial control equipment
Note: An good understanding of health and safety practices, functional
safety principles is highly recommended; and the principles of these
standards should be understood before generating procedures and
practices to meet the requirements of this Safety Manual.