Rockwell Automation AADvance Controller Safety Manual - Manual (Page 18)

 

1-8 Document: 553630
ICSTT-RM446K-EN-P Issue: 10 _C
Safety Manual (AADvance Controller)
Controller TUV Certification
TÜV Certification
TÜV is the safety certifying authority for an AADvance controller, and
they have certified The AADvance system to the following standards:
IEC 61508, Part 1-
7:1998-2000
EN 50178:1997
IEC 61511-1:2004 EN 50156-1:2004
EN 61131-2:2007 EN 54-2:1997,
A1:2006 (†)
EN 61326-3-1:2008 NFPA 72:2007
EN 61000-6-2:2005 NFPA 85:2007
EN 61000-6-4:2007 NFPA 86:2007
(†) The analogue output modules are not certified to EN 54-2.
You can download a copy of the TUV certificate from www.tuvasi.com.
Certification for use in Hazardous Environments
The AADvance controller has been investigated and approved by UL
(UL508) for use as Industrial Control Equipment in a general industrial
environment and for use in hazardous locations, Class I, Division 2,
Groups A, B, C and D. The UL file numbers are: E341697 and E251761.
File No: E341697
The AADvance controller investigation and approval is contained in the
following files:
NRAQ.E341697: Programmable Controllers investigated to ANSI/UL
508.
The products have been investigated using requirements contained in the
following standards:
 UL508, Industrial Control Equipment, Seventeenth edition, with
revisions through and including April 15, 2010.
NRAQ7.E341697: Programmable Controllers Certified for Canada
The products have been investigated using requirements contained in
the following standards: